Electr. ballast T8 QTi DALI 2×58 dimmable

Electronic ballast Quicktronic Intelligent QTi DALI 2x58W DIMMABLE for T8 fluorescent tubes – OSRAM – Supply voltage: 220…240 V – power frequency: 0, ….

Description

Electronic ballast Quicktronic Intelligent QTi DALI 2x58W DIMMABLE for T8 fluorescent tubes – OSRAM – Supply voltage: 220…240 V – power frequency: 0, 50…60 Hz – Mains voltage: 198…264 V – For usage in emergency lighting systems in accordance with EN 50172/DIN VDE 0108-100 – Configurable emergency power properties; light value without control signal between 100 % and 1 % light current adjustable – Same light current with direct and alternating voltage – Battery voltage may decrease down to 154 V, ignition may be above 198 V – Digitally regulated preheating – Perfect bulb warm start for usage with motion detector, bulb start within 0.6 s – Optimal preheating in any dimmer setting – Dimming range: 1…100% light current – Highest energy efficiency through cut-off technology (cut-off above 80 % light current) and lowest connection output with rated light current – Up to 100,000 h lifespan and more – Automatic safety shut down with defective bulb and at the end of the bulb’s lifespan (EoL T.2) – Automatic turn on after bulb change – Suitable for lamps with protection rating I – Effective over-temperature protection of the dimming EVG through intelligent thermal management with high tc temperatures – Very low stand-by consumption: – QTi DALI 1x, 2x: 0.2 W – lamps with up to 2 electronic ballasts fulfil the Minergie Standard – QTi DALI 3x, 4x: – Max. dimming speed for dynamic RGB colour light use 5 ms, from 1 % to 100 % through optimized control of the coil preheating – Energy efficiency index EEI=A1 – Test sign: ENEC 10 Sign VDE Sign EMV Sign – Additional characteristics: Cut off Sign EOL Sign – Safety: according to EN 61347-2-3 – Bulb mode: according to EN 60929 – Noise suppression: according to EN 55015:2006+A1:2007/CISPR 15, EN 55022 – Mains power harmonic: according to EN 61000-3-2 – Immunity, stability according to EN 61547 DALI product properties – Control through DALI interface – Compliance with the DALI Standards according to IEC 60929 and IEC 62386 – The control input of the DALI interface is stable against over-voltage and polarity proof for all OSRAM EVG – Touch DIM and Touch DIM sensor function: Manual dimming (Touch DIM) without any control device with standard installation button, incl. memory function (double click) and soft start
BUY NOW at Lights.co.uk*

EAN: 4050300870847